- CNC machined CrMo cog with 7mm thick Hyperglide-spline, 1/8" chain compatible - Extra wide spline interface prevents cog from deforming freehub b...
View full details
- CNC machined CrMo cog with 7mm thick Hyperglide-spline, 1/8" chain compatible - Extra wide spline interface prevents cog from deforming freehub b...
View full details
- Replacement cogs for Speedhubs - See Hub Tools for Rohloff sprocket removers - Existing Rohloff hubs can be updated to spline carrier system by...
View full details
- CNC machined steel track cog, 1.37"x24tpi (right handed) thread, 1/2" x 1/8" teeth - Choose aluminum or steel lockrings, 1.29"x24tpi left hand t...
View full details
- CNC machined steel track cog, 1.37"x24tpi (right handed) thread, 1/2" x 1/8" teeth - Choose aluminum or steel lockrings, 1.29"x24tpi left hand t...
View full details
- Replacement cogs for Speedhubs - See Hub Tools for Rohloff sprocket removers - Existing Rohloff hubs can be updated to spline carrier system by...
View full details
- Replacement cogs for Speedhubs - See Hub Tools for Rohloff sprocket removers - Existing Rohloff hubs can be updated to spline carrier system by...
View full details
- CNC machined steel track cog, 1.37"x24tpi (right handed) thread, 1/2" x 1/8" teeth - Choose aluminum or steel lockrings, 1.29"x24tpi left hand t...
View full details
- Replacement cogs for Speedhubs - See Hub Tools for Rohloff sprocket removers - Existing Rohloff hubs can be updated to spline carrier system by...
View full details
- Replacement cogs for Speedhubs - See Hub Tools for Rohloff sprocket removers - Existing Rohloff hubs can be updated to spline carrier system by...
View full details
- Replacement cogs for Speedhubs - See Hub Tools for Rohloff sprocket removers - Existing Rohloff hubs can be updated to spline carrier system by...
View full details
- CNC machined steel track cog, 1.37"x24tpi (right handed) thread, 1/2" x 1/8" teeth - Choose aluminum or steel lockrings, 1.29"x24tpi left hand t...
View full details
Sold out
- Extended range aluminum 40t or 42t cogs to fit either Shimano/SRAM 10-speed cassettes - 42t is compatible with 36t max cassettes while 40t is com...
View full details
- Extended range aluminum 40t or 42t cogs to fit either Compatible with Shimano/SRAM 10-speed cassettes - 42t is compatible with 36t max cassettes ...
View full details
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
Sold out
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock StatusCurrently not ...
View full details
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 5-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 8-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availab...
View full details
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 5-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 5-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 5-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 5-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 5-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
- 3-spline steel cogs for use with Sturmey 3-speed internal gear rear hubs - Flat or dished for tuning chainlineToday's Stock Status 10+ Availabl...
View full details
Sold out
- Phil lockrings (33.5mm x 24tpi left-hand thread - Campagnolo compatible) - Choose from stainless steel or Titanium - Made in USAToday's Stock Sta...
View full details
CNC-machined from hardened CrMo with phosphate black finish - Threaded track cog for 1.37"x24tpi (right handed) threads - Choose 3/32" or 1/8" widt...
View full details
CNC-machined from hardened CrMo with phosphate black finish - Threaded track cog for 1.37"x24tpi (right handed) threads - Choose 3/32" or 1/8" widt...
View full details
CNC-machined from hardened CrMo with phosphate black finish - Threaded track cog for 1.37"x24tpi (right handed) threads - Choose 3/32" or 1/8" widt...
View full details
CNC-machined from hardened CrMo with phosphate black finish - Threaded track cog for 1.37"x24tpi (right handed) threads - Choose 3/32" or 1/8" widt...
View full details
- CNC machined threaded steel track cogs or lockring both with chrome-plated finish - Cogs: 1.37"x24tpi (right handed) threads, 1/2" x 3/32" teeth...
View full details
- CNC machined CrMo 5/64" cog with 7mm thick Hyperglide-spline, 9sp chain compatible - Extra wide spline interface prevents cog from deforming free...
View full details